+1 Loot To Forge Icon1LootToForge
Forge · sword recipe

+1 Loot To Forge Sword Recipe: Which Class Your Ore Pushes

Search results promise one ore list per sword, and the Forge does not print one. What it prints is the class your current load is pushing, with a percentage, and each class carries its own pool of item icons. This page reads that panel across one recorded session — at four ore, eight ore and thirteen ore — and prints the three cards that came back out of it.

Session uploaded 2026-10-04Frames read at 3840×2160 on 2026-11-10Weapon side · one account
Quick answer

You aim the class, not the sword

Three weapon entries sit behind the Preview panel: Katana, Greatsword and Genshard. The load decides which entry reads what share of the roll — in this session four ore read Katana: 100%, and thirteen read Greatsword: 100% — and the named sword is drawn inside whichever entry wins. So no ore list buys you one sword. What you can control is the class you point at, and the class decides which pool, and which skill, the card can print.

The floor

The Forge refuses a load under four ore

The panel prints its own minimum when you ask for less than it accepts. The string below is copied off the frame, not paraphrased.

The prompt

You need to input at least 4 ores.

Printed over the Forge with one ore in the slot and the Forge button pressed.

The slots

Four slots, each a stack

A slot does not hold one ore. The recorded load carried ×1, ×3, ×2 and ×7 at the same time, which is thirteen ore in four slots.

The readout under them

Multiplier: 60 → 69.69

The Multiplier line moved with the load: 60 with one ore, then 63.75, 67.62 and 69.69 as the stacks went in. What it is computed from is not established here.

One session, three loads

The leading label changes class as the ore goes in

These three frames are minutes apart in the same recording, from the same account, with only the ore in the slots changed between them. The label quoted is the entry that frame shows, with its share; the panel is a list of entries, and a single frame shows only part of it.

4 ore

x1 + x3

Katana: 100%
Multiplier63.75

The first load the Forge accepted. One stack of a single ore and one stack of three, and the weapon label sat on Katana with the whole roll.

8 ore

x1 + x3 + x2 + x2

Greatsword: 50%
Multiplier67.62

Two more stacks went in and the leading label changed class. Half the roll sat on Greatsword here, which means the other half was somewhere else on the panel.

13 ore

x1 + x3 + x2 + x7

Greatsword: 100%
Multiplier69.69

A x7 stack in the fourth slot filled the entry. This is the load that was still in the slots two minutes later when the Forge consumed it.

Reading limits: both the ore count and the ore itself changed across the three frames, so the sequence does not separate "more ore" from "these ore". The other entries were not all on screen in the same frame, so the shares are not added up to 100% here, and no share is inferred for an entry this page did not read.

Inside an entry

Each class is a pool of icons, and the pools differ

Under its label, every entry prints the items it can hand you. Katana and Greatsword each showed 24 cells in these frames, and the two grids do not hold the same items.

  • The cells carry an icon and nothing else — no name, no percentage, no per-item odds.
  • Because the pool is unnamed, a page that pairs one ore with one sword cannot be checked against this panel.
  • The class on the card is the entry the roll landed in, which is why the class and the pool have to be read together.
  • Genshard is the third weapon entry named on the panel; its grid was not opened for this page.
How to aim it

Five steps before you press Forge

The order below is what the recorded session does, with the readings that came out of each step.

  1. 1. Set the Weapon button first — Armor has its own four entries and its own percentages.
  2. 2. Load at least four ore, then read the label under the Preview: the class name plus its share.
  3. 3. Add one stack at a time and re-read. At four ore this panel read Katana: 100%; at eight it read Greatsword: 50%.
  4. 4. Forge when the entry you want reads what you accept. Under 100% leaves part of the roll in another entry.
  5. 5. Read the card before you sell it: name, class, grade, Power and the skill's letter grade are all printed there.
What came out

Three cards from the same recording

Every card prints the same rows: Name, Class, a third row labelled Name that carries the grade word, Power, Price, one skill with its own letter grade, and the piece's socket markers. The numbers below are what those rolls paid on one account.

Greatsword

Glacial Spire

Eternal

Power+11.8M
Price2.31M
Skill gradeS

Release a two-strike slash, then slam the ground, dealing 600% damage in total. CD: 8s

Came out of the thirteen-ore load that read Greatsword: 100%. This is the one card whose input the recording shows.

Katana

Bone Carver

Infinite

Power+600M
Price82.5M
Skill gradeS

Slash a wave blade forward, dealing 450% damage in total. CD: 6s

A Katana from the same session. The grade word sits on the third row of the card, which is labelled Name a second time.

Greatsword

Crimson Calamity

Secret

Power+59M
Price5.9M
Skill gradeSS

Leap-slash enemies, then slam, cracking the ground, dealing 900% damage in total. CD: 8.5s

The price row was still fading in on the first frame this card appeared on; it settled on 5.9M one second later and that is the value printed here.

One chain is visible end to end: the thirteen-ore load that read Greatsword: 100% was still in the slots when the Forge consumed it, and the card that came back named Glacial Spire as a Greatsword. For the other two cards the pushed entry was not captured in the same frame as the card, so their class is what the card printed, not a link this page can prove.

Still unverified

What a sword recipe page cannot print yet

These are the gaps this recording leaves, written down so the page does not quietly fill them in with a shape that looks like an answer.

FAQ

Sword recipe questions

What is the best sword recipe in the forge?

There is no ore list that names a sword, and none was visible in the frames read here. The Forge prints a percentage next to the class entry your load is pushing — Katana, Greatsword or Genshard — and the named sword is drawn inside whichever entry holds the roll. So the thing you can actually choose is the class: in one recorded session four ore read Katana: 100%, and the same session read Greatsword: 100% at thirteen ore. Fill the entry you want, then read the card, because the card is where the name appears.

How do I get a Greatsword instead of a Katana?

Add ore and re-read the Preview label between additions. In the recorded session the first full load was 4 ore and the label read Katana: 100%; at 8 ore the label read Greatsword: 50%, and at 13 ore it read Greatsword: 100%. Only the ore in the slots changed between those three frames. Both the count and the materials moved, so this page does not claim which of the two did it — watch your own label move as you add.

How many ores does the Forge need?

The panel prints its own minimum: You need to input at least 4 ores. The Forge also has four slots and each slot holds a stack rather than a single ore, so four ore is the floor, not the ceiling — the recorded load that read Greatsword: 100% carried thirteen ore across four slots (x1, x3, x2, x7).

Can I choose which sword comes out?

Not by name. You choose the class the roll goes to, and the class carries a pool of items it can hand you: 24 cells under Katana and 24 under Greatsword in the frames read here, holding different items. The cells carry no names and no per-item numbers. The card that comes back prints the sword's name, its class, a grade word, its Power, its price and one skill with a letter grade.

What are Genshard, Katana and Greatsword?

They are the three weapon entries the Forge Preview shows on the Weapon side, each with its own percentage and its own pool of item icons. Armor is the same idea on the other side of the toggle, with four entries: Light Helmet, Light Armor, Heavy Armor and Heavy Helmet. Only the Katana and Greatsword grids were read in full for this page; the Genshard grid is named but was not opened.

Does a higher Multiplier give a better sword?

That link was not established by any frame read here. The Forge prints a Multiplier under its four slots, and in this session it read 60 with one ore, 63.75 at four ore, 67.62 at eight and 69.69 at thirteen — so it moves with the load, and it rose rather than fell as ore went in. What the number is computed from, and what it changes in the forged piece, is not readable from these panels.

Next step

Pages that finish the decision

Evidence

Where these readings come from

Every number on this page was read off a frame of one video, not off a summary of it.